Wednesday, 15 May 2013

Pyramids built from geopolymer stones? - Limestone concrete

Pyramids made of concrete


Ive been doing some reading on geo-polymers.  Some information I already knew of the mix of limestone and clays.

While I dont doubt there is some stone in many structures, it is well documented even in The Great Wall of China geo-polymer was used with extensive use of sticky rice starch which is essentially a water thickener.

While many think people of the time were quite basic with low technology I think they had much greater knowledge than many think. To me the Egyptians and other societies such as Mayans were salt of the earth, very in contact with climate, nature, habitat and seasons. My guess is pyramids would have been used for many things such as navigation, surveying land and earth.

It is known amongst tradesmen that years ago using lime mortar, the tradesman would go to the mill and request millers flour which was essentially ground stalk releasing the cellulose from the plant.
This cellulose acted as a water thickener which made the non-hydraulic lime mortar fluid with a lower volume of water.  Less water meant less shrinkage, less weight and a harder mix.
The product now is regarded as methyl cellulose which is commonly used as the main ingredient in wall paper glue. Methyl cellulose is present in hydraulic lime and cement products today.

India use sugar which is different but in non-hydraulic lime mortar claims it increases non-hydraulic lime mortar strength by as much as 50%.

The great thing about non-hydraulic lime mortar is that  you can keep it covered for use with a skin of water and it will essentially not go off until it is exposed to air where re-absorption carbon dioxide sets it off .

Hydraulic mortars will go off with a very short life of about an hour dependant on heat to go hard with the advantage of going off underwater etc so they both have their place.

In looking at the grain principle, another byproduct of grain production is silicon dioxide, sodium silicate (water glass). This and similar other products are used for sealing limestone today to prevent mould and harden the surface to prevent corrosion.

Could have Egyptians used these byproducts of grain production to harden the stones & harden the skin, harden the evident render on the outer skin.

Could have Egyptians painted the pyramids with a limewash with silicon dioxide to form a glowing white hard skin, glowing in all their glory bright white in a harsh desert?

I feel the Egyptians would have used both these products and poured large stones in the pyramids insitu as is done today with concrete and similar reconstituted limestone blocks today.

The Egyptians could have poured the self leveling mix into the ground forming a perfect level footing for the pyramids. Using the concrete mix would explain the fine 1mm joints between the large stones.

Egyptians would have made a large mix then walked it up the pyramid, poured it one by one into boxes and formed cold joints where the mix met the stone.

I feel the pyramids were navigation aids, large white sparkling beacons where triangulation was used to ascertain distance, angle, seasons, climate upon their face.

They had Alchemists. They had knowledge. More than many grant them today.

Its interesting stuff.







Sunday, 21 April 2013

Limestone pointing in fremantle

After returning to Fremantle for a look at my Great Grandparents home ground I noticed a much greater usage of White washed sand and white portland cement as a pointing mortar mixture of limestone.

Its as if someone has presumed early settlers used beach sand which is incorrect. Its bastardy I say!

This stark white brittle mix is totally inappropriate as a mortar for limestone. Apart from its starkness, it is harder than the stone itself, its brittle, and breaks all the principles of masonry where the mortar should be weaker than the material itself.

If the building moves the crack should be int he mortar not the material.  The harder the stone, the harder the mortar.

Many of our older buildings had their building materials sourced from the nearest point, mainly because transport such s horse and cart added large costs to the construction.

The sand was mostly quarried from the site it was used. The lime was slaked on site then the mortar mixed with hoe and board. Much of the mortar ingredients are a mixture of the soil upon the building was built.

Based on this principle the slaked lime may have some ash, the sand will relate to the sand under the building which is why we see some of the Subiaco building mortar 'peach' in colour.

The mortars were based on the 3:1 aggregate matrix principle using a lime putty which dries slower as it reabsorbs the carbon dioxide to harden. Lime mortar using slaked putty can be kept for days immersed underwater or as long as it is kept wet preventing water from evaporating.

What people don't envisage now is the large quantity of limestone dust left from the stone dressing and crumbled limestone excavation that my well have occurred 'on-site'. Limestone dust also left from the pre-slaking process. Burnt but not slaked.

These would have in many cases been mixed together to build a colour that either matches or slightly darker to match the aging stone.

 Here attached is an image of the older point, unfortunately vandalised by an inconsiderate person.

I would be more inclined to use a low loam sand such as plasterers sand even with the addition of some pinjar sand with a 'creme' (blue clinker) cement with lime in a 9 sand:2 lime: 1 creme cement mix as a limestone mortar.

A pure lime mortar has a totally different behavior. There may even be some shell in early mortar.

 Matching the stone colour  for today and tomorrow is the key in many cases.

 

Friday, 16 March 2012

Whitewash for lighthouses

A formula used by the U.S. Government in making whitewash for lighthouses and other public buildings.

Unslaked lime.........2 pecks
common salt...........1peck
rice flour............3pounds
spanish whiting.......half pound
Glue..................1 pound
water.................a sufficient quantity

Please not that this style of wash will not breath like a standard lime wash.   Any wash that may have moisture drawn in from behind through capillary action etc may cause a water resistant product to bubble. Glue being one of the main reasons for the water resistance which also breaks down with constant moisture exposure. 

Breathable washes allow moisture to evaporate away preventing bubbling.  I have made renders with water resistant products in them.  Even though these mixes are resistant not waterproof to moisture they prevent water ingress but breath enough to allow any retained moisture to evaporate.

Lime wash strength is its ability to shed water, ongoing coats required to some degree but in a situation where a wall may stay wet, less maintenance than standard paints.

Lime washes also can give natural flat look that in some architecture looks fantastic.  I love a natural flat look.


Sunday, 11 March 2012

Tuesday, 6 March 2012

Running an insitu plaster cornice - Internal

Running an external cement mortar based corbel - plastering

True tuckpointing demonstration - the traditonal way - Brickwork

I think some people mistake re-pointing for tuckpointing when quite often they are doing a repointed "struck joint".

A struck joint is done with the edge of a trowel and can be weather struck to shed water easier.




Keywords: Bricklaying, Pointing, Cement, Tuck Pointing, Federation, Victorian, Australia