Friday, 23 August 2013
Best limestone point mix
Posted by
Neil
at
04:45
0
comments
Labels: ashlar, Federation, Heritage, Lime putty, Limestone, mortar, nonhydraulic mortar, random stone, rockface finish
Saturday, 18 May 2013
Tuckpointed limestone with red tuck
Here we have the old heirtage Army base of Fremantle utilising a red tuckpoint,
This has been repointed since its original build being highly exposed to weather.
Posted by
Neil
at
18:37
0
comments
Labels: ashlar, Federation, Fremantle, Heritage, lime, Lime putty, Limestone, mortar, nonhydraulic mortar, Ribbon joint, Victorian
Friday, 17 May 2013
Early Fremantle limestone house tuckpointed
At first I thought this was the poor mans tuckpoint. A created recess then pointed with paint which was the case without having to place the tuck. It was quite hard to tell without jumping the fence.
The tuck appeared almost flush with the point which would make it hard to use a frenchman.
The stone is probably from the nearby having the soil colours of a less consistent floor of stone. They were more than likely lose stones buried in a field rather than from a floor.
I love the colours, the flaws and the inconsistencies.
Note the mortar colour which appears very much original it may be unslaked burnt lime sand.
I love stone, collected stone, hand built, like art no machines.
I want to time travel back for a week in this Australian history; immerse myself in the time.
![]() |
| Fremantle limestone and tuckpoint |
Posted by
Neil
at
23:55
0
comments
Labels: Federation, Fremantle, Heritage, lime, Lime putty, Limestone, mortar, Ribbon joint, stonemason, Tuck pointing, Victorian
Pinjar biscuit Fremantle past - Stone mortar pointing
And here we have one of Fremantle's formal early pieces with its non-hydaulic pieces uncovered to show what I discussed earlier where darker stone is revealed and possibly the evidence for darker lime washes we saw in the vernacular of Fremantle.
Here we see two colours. Both construction mortar and a lighter facing mortar. First stone buildings may also have had conch lime in the facing mix to increase strength.
While we now have penetrating sealers which harden stone exterior and prevent stone losing its colour to mold, evidence is present of a hydraulic Portland bag over the top.
This stone would have been chosen darker, slightly softer for facing.
Please click on my adverts to help me buy a new camera
Posted by
Neil
at
19:49
0
comments
Labels: Federation, Fremantle, lime, Lime putty, nonhydraulic mortar, pointing, rockface finish, stonemason, Tuck pointing, Victorian, White wash
Tuckpointing, a section view of tuckpointing
Here I found today a great section view of tuckpointing. Here it shows the stopping laid over the joint, the tuck or whiting that is laid over the top.
Some of the whiting may be set wide of the real mortar joint to keep the joints aligned called a blind joint. Bricks, even modern vary at least 2mm unless they are refractory.
Posted by
Neil
at
02:38
0
comments
Labels: Brick, Federation, lime, mortar, Tuck pointing, Victorian
Fremantle mortar limestone pointing peach in colour
Today I visited Fremantle again to see further proof of the old mortar almost a peach in colour or of terracotta to tan in colour. In dealing with different limestone over the years it varies in colour tremendously. Moore river stone is very biscuit in colour.
Even a photo Ill publish later shows one of the early historic buildings with the layers of paint pretending to be white wash removed.
It clearly shows the stone to be quite tan in nature and the pointing to of two distinct colours. The construction mortar is quite dark, The facing mortar is a lighter tan almost a peach colour as discussed before.
I would say this stone for its softer attributes which allow for the pillow face finish it was given. Many of the deliveries we receive from some quarries these days is extremely hard. The axe bounces of much of this especially when there is a high content of cap rock.
The scrap of this stone would have been slaked on site along with the soil colour made up the larger mortar component attributes in both cases. Unslaked burnt fines of the stone would forming sand would make part of the mortar giving it the colour.
I dare say some of the old washes would have been given this light brown colour from the darker stone colour, less calcified no doubt an higher in silica I believe.
Here is an old Fremantle stone wall I found that is of what I believe an original point protected by an outhouse for years under the cover of tin in a row of terraces.
The image of the luxury building will show darker mortar samples again right on the harbour of Fremantle.
Posted by
Neil
at
01:04
0
comments
Labels: Federation, Fremantle, Heritage, lime, Limestone, mortar, nonhydraulic mortar, pointing, stone, Tuck pointing, Victorian
Thursday, 16 May 2013
Non hydraulic mortars - The lost recipes
In the past non-hydraulic mortars were common place. All manner of additives are added to extend and strengthen the mortar. Mortars were handed down common to the vernacular.
Here is discussion of one:
The artisans
of Chettinadu used a special recipe for the buildings that they built.
The mortar
mixture was almost the same as that which was used by Tirumalai
Nayakkar.
Sugar cane
juice was used instead of cane sugar solution.
The brickwork
was done with this type of mortar. But the walls thus built were
covered with a special type of plaster.
Again Conch
shell lime was used. This was mixed with egg white, sugar cane juice,
nux vomica nuts, and the thin and soft flesh of young unripe
coconuts(iLaniir valzukkai).
This mixture
is plastered. After some time, the plaster covering will be seen to
'sweat'.
This is pressed very gently with very high quality soft fine muslin
cloth and the water droplets
are absorbed.
When the
plaster covering is semi-hard, it is polished with a very smooth pumice
stone(maakkal).
When the
plaster hardens, it attains a creamy lustre and seems to have a
translucence
of its own.
http://www.visvacomplex.com/ancient_building_recipe.html
VIDYALANKARA
DR.S.JAYABARATHI
JayBee
MALAYSIA
Online:16/05/2013
Posted by
Neil
at
06:32
0
comments
Labels: geopolymers, Limestone, mortar, nonhydraulic mortar, stone





